PDA

View Full Version : Rudycocker Bodies FS



Custom24
03-12-2010, 11:17 PM
OK up for grabs I have the last body kit Rudycocker 1 piece Raw body
Price is $150 PP'D and shipped anywhere in the US we also will take Money orders as well. PRICE IS FIRM!!!!!!
These guns with a low pressure valve and right spring combo will operate at 155 PSI
http://i60.photobucket.com/albums/h24/InvasionPB/Egosrudybody036.jpg
http://i60.photobucket.com/albums/h24/InvasionPB/Egosrudybody037.jpg
http://i60.photobucket.com/albums/h24/InvasionPB/Egosrudybody039.jpg
Price is firm as we only have 1 kit left total It's ready to go out the door at this time. Once it's gone that's it! We will not have anymore kits for sale EVER!!!

WORR13
03-12-2010, 11:59 PM
they come with the special low psi chamber as pictured correct? is everything in the last pic included? threaded ivg or no? angel feedneck? please let me know id like to get one. also any flex in price?

tx_aggie
03-13-2010, 12:18 AM
PM incoming

FeWolf
03-13-2010, 01:23 AM
it comes as the bottom pic?

Custom24
03-13-2010, 01:22 PM
Yes what you see in bottom pic is what you get the price is firm like I said once these are gone that's it there will be no more made ever!!!!

majinebz
03-13-2010, 05:12 PM
I purchased several last time Custom24 had these up for sale.

They use angel feednecks, no IVG (use rex dialer or spacer)

I think I paid more then 150.00 for mine.

Best of luck with your sale Custom24. I may get one more.

Custom24
03-13-2010, 11:24 PM
OK one is sold the other two are sold pending funds these bodies are going to:
tx_aggie
Worr13
Tolar250

When we get the bolts turned down on the remaining bodies I will have them up for sale.
Thanks guys

KPCS
03-14-2010, 03:52 AM
Damn, I wish I had the money for one of these.
After milling Wolfs, I would like to have one of these.

I got to sell something fast to get one of these.

Ken W

Anyone want to buy a LB Nightmare ??

langless28
03-14-2010, 04:01 AM
what is that tiny extrusion on the bottom where a frame screw would go for?

Custom24
03-14-2010, 02:50 PM
what is that tiny extrusion on the bottom where a frame screw would go for?

That's for the front grip frame screw so it didnt block the flow of air coming though the gun.

Custom24
03-22-2010, 11:09 PM
******************3 more kit's are ready to go out the door******************

fatyoda
03-23-2010, 04:56 PM
what kind of internials do these bodies require? pre 2k or later. never had a rudy, it would be nice to build one. also is there a site I can go to to help with the build?
fatyoda@cox.net
ps , you have a pm

hmcl281
03-23-2010, 05:13 PM
what kind of internials do these bodies require? pre 2k or later. never had a rudy, it would be nice to build one. also is there a site I can go to to help with the build?
fatyoda@cox.net

2k internals and they r really just like any other cockers

fatyoda
03-23-2010, 06:05 PM
2k internals and they r really just like any other cockers

so if i have a 2k+ cocker(free flow, karni,evo,ect.....), i could use the front pnuematics, grip frame and internals to complete the build?

tx_aggie
03-23-2010, 06:47 PM
so if i have a 2k+ cocker(free flow, karni,evo,ect.....), i could use the front pnuematics, grip frame and internals to complete the build?

Yep, you sure can.

haxorwear
03-23-2010, 07:08 PM
PM'd you about a body.

hmcl281
03-23-2010, 07:21 PM
i think u need a dialer ivg since i do not believe the body is thread for an ivg

mfaded
03-23-2010, 08:38 PM
I'm interested, but a bit new to cockers. What special features does these have? or can you link me to more info on it.

thanks

haxorwear
03-23-2010, 09:18 PM
I'm interested, but a bit new to cockers. What special features does these have? or can you link me to more info on it.

thanks

These have a huge air chamber (the big air space in front and through the lower tube) to operate at quite low pressure. They are just like any other cocker, except that the LPR is usually relocated (not on the front block) and need a gripframe with some milling done to accomodate the front mount screw since it sticks out of the body a bit.

WORR13
03-23-2010, 11:02 PM
they are not threaded for ivg so you need a dialer style. they also come with an ivg spacer. i think so you can adjust the velocity with the hp reg instead?

i just received mine the other day, very nice, im happy. ive been looking for a dean for a while. thanks custom

Custom24
03-24-2010, 12:02 AM
they are not threaded for ivg so you need a dialer style. they also come with an ivg spacer. i think so you can adjust the velocity with the hp reg instead?

i just received mine the other day, very nice, im happy. ive been looking for a dean for a while. thanks custom

Yeah Rudy made them without and Adjustable IVG cause when he built them He picked the best spring combo for the gun to run at 155psi and shoot up into the 300 fps range. He didnt want people adjusting the rear spring tension and messing up the spring combo. You just set your velocity with the palmer stab in most cases. All of them will come with some form of a IVG spacer not all will be the Aluminum ones we had made as we ran out of those first.

majinebz
03-24-2010, 12:19 AM
Dialer or a spring spacer. They are not prepped for IVGs


eeehhh I was late, guess that was answered a couple times.

WORR13
03-24-2010, 12:51 AM
any recommendation on springs? lighter, with that low of an operating psi?

fatyoda
03-24-2010, 01:29 AM
You have a pm

Custom24
03-24-2010, 02:22 AM
any recommendation on springs? lighter, with that low of an operating psi?

lightest valve and main spring you can get and still get a velocity over 300
Rudy had it down pat they ran 155 psi on the palmer stab and with a .679 barrel you could shoot any paint u wanted pretty much velocity at 285 getting 1000+ on a 16 oz co2 with +/- 1or2 across the chrono. This is mine http://i60.photobucket.com/albums/h24/InvasionPB/Cockerrailalias001.jpg
I used a .684 bore on it and got the same results all but I got 1000 shots offa 16oz Co2

fatyoda
03-24-2010, 02:23 AM
you have another pm


he he he he he he!!!!!

Custom24
03-24-2010, 02:23 AM
You have a pm

One of the second batch Bodies is pending payment from fatyoda

wiffle32
03-24-2010, 02:48 AM
I need to consult the wife. But I don't think I'd be willing to let this go.

How many have you got left, total? 6, now?

fatyoda
03-24-2010, 02:53 AM
One of the second batch Bodies is pending payment from fatyoda

last serial# available please, please, please

wiffle32
03-24-2010, 02:55 AM
last serial# available please, please, please

Aww but I wanted the last serial! Haha... Are they even numbered? I failed to notice.

Either way, I got approval from my wife. She appreciates these sorts of things.

PMing for a paypal address!

fatyoda
03-24-2010, 02:55 AM
i need to consult the wife. But i don't think i'd be willing to let this go.

How many have you got left, total? 6, now?

you can dooooo itttt !!!!!!

wiffle32
03-24-2010, 02:58 AM
Custom24;

You have exceeded your inbox limit! Clear it out and lemme know! Paypal ready to rock.

Custom24
03-24-2010, 12:55 PM
Custom24;

You have exceeded your inbox limit! Clear it out and lemme know! Paypal ready to rock.

Inbox cleaned up a bit pm inbound

FeWolf
03-24-2010, 01:26 PM
if one is around next week I am going to break down and get one, payday blues

Custom24
03-25-2010, 02:19 AM
second batch is gone:
1-wiffle
2-Fatyoda pending funds
2-haxowear pending funds

fatyoda
03-25-2010, 06:38 PM
noticed an abcence of a ball detent hole. Is that left up to the purchacer? Or is one not needed? Also, since the lpr takes the place of the hpr, where does the hpr go, or do you get a max flow system or somthing to that effect. Sorry for all of the questions, but I want to do it the best way.

WORR13
03-26-2010, 12:37 AM
u have to work out the hp reg. the palmers female stab is the best option ive found. or u could use something like the agd flatline setup. you have to mount the hp reg as some kind of asa setup. or u could get creative and remote mount it

wiffle32
03-26-2010, 01:55 AM
u have to work out the hp reg. the palmers female stab is the best option ive found. or u could use something like the agd flatline setup. you have to mount the hp reg as some kind of asa setup. or u could get creative and remote mount it

I was thinking of throwing a mini ASA on the bottom of the frontblock where Custom24 has his LPR mounted. Then I could just put the LPR waaaay out on the end of the expansion chamber and have a vertical regulator.

tx_aggie
03-26-2010, 06:11 AM
I was thinking of throwing a mini ASA on the bottom of the frontblock where Custom24 has his LPR mounted. Then I could just put the LPR waaaay out on the end of the expansion chamber and have a vertical regulator.

Or run the LPR out of a guage port with a 90 degree 1/8 NPT fitting...

hmcl281
03-26-2010, 06:16 AM
i think the idea is to have the air go through the lpc and right into the valve? with a vertical reg the air would be filling the left instead of the large volume going straight into the valve.

haxorwear
03-26-2010, 06:30 AM
second batch is gone:
1-wiffle
2-Fatyoda pending funds
2-haxowear pending funds

Need your paypal address first. :)

Custom24
03-26-2010, 12:44 PM
i think the idea is to have the air go through the lpc and right into the valve? with a vertical reg the air would be filling the left instead of the large volume going straight into the valve.

yes this is the point of running the are straight throug the LPC.
If you guys dont wanna run a female Stab we have a few adaptors that gets rid of the LPC and you can mount the LPR in it's place and run a normal reg with vertical adaptor I will take pics today.

wiffle32
03-27-2010, 03:45 AM
yes this is the point of running the are straight throug the LPC.
If you guys dont wanna run a female Stab we have a few adaptors that gets rid of the LPC and you can mount the LPR in it's place and run a normal reg with vertical adaptor I will take pics today.

Will this item still have the massive expansion chamber? I was just gonna stick an LPR way out on the end of the LPC and run the reg on a mini-ASA adaptor. My knowledge of fluid dynamics tells me that the volume of the chamber is all that matters at any significant pressure. The air will refill the chamber faster than it's leaving, and I highly doubt the entire chamber of air will be used up each shot. Therefore, I see no real benefit to a smooth flowpath and intend to circumvent it entirely. A fluid so light as air will not suffer any significant head loss over such a short run.

I would welcome a counter-point.

Custom24
03-27-2010, 04:25 AM
Not sure on all the fluid dynamics stuff all I can go by is what Ive been told by Rudy which this design belongs to him. He has said in the past the air chamber was more for volume and flow as it only lowered the operating pressure about 5 psi. His design was to get the lowest operating pressure and the most shots possible with less stress on the paintball which in turned allowed you to shoot more accurate and a much more fragile paint with very little problems. Anyway here are the adapters I was talking about we only have 5 left they are a first come first serve basis for $30 PP and shipped.
http://i60.photobucket.com/albums/h24/InvasionPB/Rudycockeradaptors005.jpg
http://i60.photobucket.com/albums/h24/InvasionPB/Rudycockeradaptors003.jpg

1-pending to tx-aggie

wiffle32
03-27-2010, 04:30 AM
Hey I love the design, don't get me wrong! I'm just saying it is more of a style preference on where and how one would attach the HPR.

I think Rudy did a fantastic job designing this body and stand by the super huge air volume whole-heartedly!

Would you say that a Rudy would run at the same pressure or similar with this LPR adaptor instead of the LPC? Just doesn't seem like a Rudy without the LPC, anyway, haha!

Custom24
03-27-2010, 04:42 AM
Hey I love the design, don't get me wrong! I'm just saying it is more of a style preference on where and how one would attach the HPR.

I think Rudy did a fantastic job designing this body and stand by the super huge air volume whole-heartedly!

Would you say that a Rudy would run at the same pressure or similar with this LPR adaptor instead of the LPC? Just doesn't seem like a Rudy without the LPC, anyway, haha!

Nah it will run about 5psi higher with the adapter
yeah the huge LPC set them apart from the rest

brucebruce
03-27-2010, 01:22 PM
Sooo if there's anymore bodies left I wanna jump'onit! Pm'ing ya for the goodness

Custom24
03-27-2010, 01:34 PM
LOOKS like the last batch is already spoken for and not even up yet.

fatyoda
03-27-2010, 06:06 PM
So if you put the adapter on the front and run the lpr there, do you have to have some sort of adapter to mount the hpr underneath the body as a regular cocker.?

wiffle32
03-28-2010, 04:42 AM
So if you put the adapter on the front and run the lpr there, do you have to have some sort of adapter to mount the hpr underneath the body as a regular cocker.?

Yeah, a mini-ASA adaptor. Check out some cocker parts threads for them... Someone here is selling them.

I'm not on the hunt right now, least not very hard.

wiffle32
03-28-2010, 08:59 PM
Yeah, a mini-ASA adaptor. Check out some cocker parts threads for them... Someone here is selling them.

I'm not on the hunt right now, least not very hard.

http://img38.imageshack.us/img38/513/dsc00608v.th.jpg (http://img38.imageshack.us/i/dsc00608v.jpg/)

Tell me this isn't pretty badass? Hah!

BTW, they come with a bolt that takes AKA style plungers. Just so happens I had one already!

fatyoda
03-28-2010, 10:44 PM
rotflall that weight up front, you might want to invest in a tripodrotfl

wiffle32
03-28-2010, 11:04 PM
rotflall that weight up front, you might want to invest in a tripodrotfl

For a 1oz LPR? haha

fatyoda
03-30-2010, 12:56 AM
that would be a really long 3way hose. You ought to mock it up that way with all of the parts on.

FeWolf
04-01-2010, 12:08 AM
Actually front weight would balance the weight from the tank

Custom24
04-21-2010, 03:45 AM
OK up for grabs I have the last body kit Rudycocker 1 piece Raw body
Price is $150 PP'D and shipped anywhere in the US we also will take Money orders as well. PRICE IS FIRM!!!!!!
These guns with a low pressure valve and right spring combo will operate at 155 PSI
http://i60.photobucket.com/albums/h24/InvasionPB/Egosrudybody036.jpg
http://i60.photobucket.com/albums/h24/InvasionPB/Egosrudybody037.jpg
http://i60.photobucket.com/albums/h24/InvasionPB/Egosrudybody039.jpg
Price is firm as we only have 1 kit left total It's ready to go out the door at this time. Once it's gone that's it! We will not have anymore kits for sale EVER!!!

OK I only have one kit left up for grabs!!!!!

azzy
04-21-2010, 04:54 AM
Ill take the last one. Pmed you!

Custom24
04-21-2010, 04:58 AM
last one is sold pending funds