PDA

View Full Version : AT how does it work?



PsYcHoHoLiC
05-01-2008, 02:45 AM
AutoTrigger...

I've never seen one up close so how do they work?

Andrewliu6294
05-01-2008, 02:58 AM
Basically, there's a cam attached to the pump arm. When you pump, the cam is rotated, pushing the trigger forward so you can't release the sear.

When the pump stroke is returned, the trigger returns relative to the pump position, to the point where you can fire the gun. Continuous pressure on the trigger while pumping will result in the AT effect.

PsYcHoHoLiC
05-01-2008, 03:07 AM
Ok then how does the arm on the side that goes to the cam and the pump arm move back and forth does it have a slot that the screw to the pump are can slide though? because it don't look right.. how could you pump it with that bracket on it like that?

Andrewliu6294
05-01-2008, 07:28 PM
Theres a slot on the lever, that the pump arm screw slides through.

PsYcHoHoLiC
05-02-2008, 12:28 AM
makes sense to me now thanks....

!BuNkEr!BuStEr!
05-02-2008, 01:13 AM
Is it possible to set this up for a ghetto rig?

PsYcHoHoLiC
05-02-2008, 02:41 AM
I have seen one one here and have been think about that same thing thats why i need to know how it worked....

pump
05-02-2008, 04:21 AM
yeah pretty easy to make check this out hope it helps
http://www.hawaiipb.com/index.php/topic,118.0.html

PsYcHoHoLiC
05-02-2008, 01:19 PM
so could a person just buy a ccm and use it on any frame? or just ccm only? and does anyone make one for benchmark frames?

pump
05-02-2008, 01:35 PM
if you drill out the hole you can, but you need to mod the slider plate too to clear it

easier to just get a different cam IMO thats why i did mine that way, also you dont ruin the anno of the frame

!BuNkEr!BuStEr!
05-07-2008, 01:16 AM
Time to het up Ken lol.

PsYcHoHoLiC
05-07-2008, 02:25 AM
Time to het up Ken lol.

I was thinking the same thing..:D

pump
05-07-2008, 03:42 AM
Time to het up Ken lol.
what is het up Ken?

!BuNkEr!BuStEr!
05-08-2008, 12:43 AM
Sorry, I meant "hit Ken W up." He is an excellent machinest and he is also in the site supporters part of the website.

PsYcHoHoLiC
05-08-2008, 02:23 AM
I got the point..lol :)