Results 1 to 3 of 3

Thread: AKA Merlin Specs

  1. #1
    Join Date
    Mar 2007
    Medford, OR

    AKA Merlin Specs

    I pulled these dimensions from the Merlin body I got from Aaron (AKA). I cannot guarantee that these are AKA's specs.

    My body was milled for 04 style AKA detents and eyes so here are the dimensions:

    ** Note: .09 holes are 4-40 threads**

    I am not responsible for anything made using these dimensions, all tolerences are +- .0005
    Last edited by evil_racecocker; 06-26-2009 at 10:58 PM.

  2. #2
    Join Date
    Nov 2008
    I used these measurements on my merlin extrusion and found out the hammer lug slot measurements are way off. I don't have the correct measurements on me right now, but will post when I go to my dad's shop.
    Last edited by volwrath; 08-18-2009 at 10:08 PM.

  3. #3
    Join Date
    Sep 2007
    Excalibur/ Viking/ Merlin feedneck threads
    This has been a TEST, This life has been a TEST.
    Had this been an Actual LIFE you would had lived in
    the Mountains, Never worked and SKIED EVERY DAY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts