Page 1 of 11 123 ... LastLast
Results 1 to 10 of 104

Thread: Belsales Evolution X build thread

  1. #1
    Join Date
    Sep 2007
    Location
    WV
    Posts
    1,092

    Belsales Evolution X build thread

    I'm editing this original post to create a picture/brief description overview of my 2k3 Belsales Evolution X project build. It's now considered "finished" as of early May 2013. It had been an on-going project since June 2012. You can still get the full story by reading all the posts (I know, its long). Here goes:

    How I received it (early June 2012) - Picture of exactly how I bought this Evo from a member on MCB:





    Some changes (late June 2012) - Eclipse Hinge, Check-It Unimount, Dye Stickies, Belsales Beavertail, CCM No-Pro, Race SM-1 Barrel, and Macroline Kit:





    Another big change (mid September 2012) - AKALMP Sidewinder, Black Belsales Evo .44mag, QEV's, LPR, Hollowpoint, and front end hose - I thought I was "finished" with it at this point:







    The next chapter (early February 2013) - Deciding to go for a more original look by picking up an Angry frame, some Freak parts, and a lot of NEW original Belsales parts:





    Off to Canadia (mid February 2013) - Sending a few parts to Ton6ixer's anodizing in BC, Canada to be ano matched to the body (body sent as reference only - it was not re-anodized):





    Ano completed picture from Ton6ixer (mid March 2013) - Ton6ixer finished anodizing the parts ahead of schedule and shot me a picture before shipping them back:





    Evo back in the states (late March 2013) - Received the parts back from anodizing in the mail and laid everything out for the build, it was then sent off to docfire (Custom Cockers) for assembly and tuning:





    Back from Cali (early May 2013) - I sent this off to Garrett - aka docfire (Custom Cockers) - for full assembly and tuning and what a GREAT job he did! This is finally "finished":











    List of parts used:
    - Undrilled Blue Fade 2K3 Belsales Evolution-X Body #163926
    - Belsales Front Block
    - Belsales Back Block
    - Belsales Vertical ASA
    - Belsales Angry .45 Hump Back Trigger Frame with:
    ---- WGP Aluminum Trigger Shoe -OR- WGP Composite Trigger Shoe
    ---- AKALMP Trigger Plate
    ---- AKALMP Trigger Springs
    ---- Belsales Roller Sear
    ---- 10/32 Brass Tipped Screws
    ---- Dye Sticky 3 Grips
    - CCM No-Pro Feedneck
    - Stainless Steel Pump Arm
    - Belsales Cocking Rod
    - Belsales Wire Detent
    - Belsales Wire Beavertail
    - Belsales Evolution Delrin Bolt and Pin
    - Belsales Rex Dialer Hammer Kit with Belsales Springs and Square Lug
    - Belsales Evo Supercharger Valve and Spring with:
    ---- Stainless Valve Retaining Screw
    ---- Stainless Valve Jam Nut with O-Rings
    - ANS Flat Face Front Block Screw
    - Belsales Evo .44 Magnum Ram
    - Two Belsales Swivel QEV's
    - Belsales Evo LPR
    - Belsales Hollowpoint 3-Way
    - Stainless Actuator Rod
    - Black Front End Hose
    - AKALMP Medium Length Sidewinder HPR
    - Black Macroline with Stainless Fittings
    - Check-It Unimount

    Supporting parts used:
    - Full Freak Barrel Kit with:
    ---- 10 inserts (.675" - .695")
    ---- 4 matching tips (12" AA solid, 12" Tear Drop solid, 14" AA fade, & 14" Tear Drop fade)
    ---- 1 black second generation cocker threaded back
    - Smoke HALO B Loader with:
    ---- v35 Board
    ---- The BONE battery pack
    ---- Speed feed
    - 68ci 4500psi Ninja HPA tank with Ninja cover

    Stock parts that are not being used but are being kept:
    - 12" Smart Parts Progressive one-piece barrel
    - Stainless Smart Parts Freak Back
    - Hogue .45 frame grips
    - Belsales Nickel Trigger Shoe
    - Belsales Slider Trigger Plate
    - Belsales Stainless Front Block Screw
    - Belsales Gas-Thru Foregrip
    - Belsales Non-clamping Feedneck
    - Chrome Belsales LPR
    - Chrome Belsales Hollowpoint 3-Way
    - Chrome Belsales .44 Magnum Ram
    - Blue/Silver Smart Parts Max-Flo



    HUGE THANKS to all of those that made the project come together.
    - Docfire Paintball (Garrett on Custom Cockers forum) - full assembly, tuning, trigger job, and all of his love on it
    - Ton6ixer's Anodizing (Mitchell) - match anodizing the Angry slider, Freak tips, and a few other pieces for me
    - Compulsive Paintball (John) - for always getting back to me via e-mail and for many many parts
    - Belsales UK (Steve) - for shipping everything I needed over the pond
    - All of the Custom Cockers forum members for their help, guidance, and parts - especially o_nothing (Dave), buzzinhi (Tom), rschoi (Rich), dbkid (Jimmy), cshank, addicted2dunes, skinnyfatguy, pbin88, sunnysideca76, and any others I might have forgotten
    - My fiancÚ for not killing me through the parts-hunting process
    - Last, but not least, my wallet!
    Last edited by MILKMAN; 05-19-2013 at 02:39 PM.

  2. #2
    Join Date
    Jun 2010
    Location
    Azle, Tx
    Posts
    2,808
    are you going to get rid of that shocktech feedneck?
    Quote Originally Posted by aquadgio1 View Post
    Oh Ryan, Oh Ryan....where art thou!!

  3. #3
    Join Date
    Sep 2007
    Location
    WV
    Posts
    1,092
    Quote Originally Posted by ryanhall41 View Post
    are you going to get rid of that shocktech feedneck?
    Yes sir
    Blue Fade 2K3 Belsales Evolution X Build
    Started: June 7, 2012
    Finished: May 19, 2013

  4. #4
    Join Date
    Aug 2008
    Location
    Rye Brook / Port Chester
    Posts
    6,693
    why not use the stock barrel on it and get it freak'd?
    Last edited by Modded-Like-Hell; 06-16-2012 at 10:16 PM.
    Quote Originally Posted by Bulldog View Post
    MLH doesn't need feedback, he's so well known everyone trusts him

  5. #5
    Join Date
    Jun 2010
    Location
    Azle, Tx
    Posts
    2,808
    Quote Originally Posted by MILKMAN View Post
    Yes sir
    any chance that your ready to part with it now?
    Quote Originally Posted by aquadgio1 View Post
    Oh Ryan, Oh Ryan....where art thou!!

  6. #6
    Join Date
    Sep 2007
    Location
    WV
    Posts
    1,092
    Quote Originally Posted by Modded-Like-Hell View Post
    why not use the stock barrel on it and get it freak'd?
    Get it freak'd? Dunno what you mean by this MLH. Please enlighten me hah.

    Quote Originally Posted by ryanhall41 View Post
    any chance that your ready to part with it now?
    Sure, PM me.
    Blue Fade 2K3 Belsales Evolution X Build
    Started: June 7, 2012
    Finished: May 19, 2013

  7. #7
    Join Date
    Jun 2010
    Location
    Azle, Tx
    Posts
    2,808
    Quote Originally Posted by MILKMAN View Post
    Get it freak'd? Dunno what you mean by this MLH. Please enlighten me hah.



    Sure, PM me.
    pm'd and he means that you can have the barrel bored to accept freak inserts
    Quote Originally Posted by aquadgio1 View Post
    Oh Ryan, Oh Ryan....where art thou!!

  8. #8
    Join Date
    Feb 2012
    Location
    Near Reno
    Posts
    10,480
    Wanna sell me that barrel kit for my Racegun?
    Proudly shooting CCM and PPS equipment.
    Quote Originally Posted by pnt8ballplyr View Post
    dang nab it I haven't finished counting My funds over at coin star yet...
    Quote Originally Posted by FearLess_Leader View Post
    No winning in MQ+Race Frame, just broken dreams...
    My Brother, treat him well
    Opponents will be shot,Wipers will be shot again.
    Seek justice, love mercy, and walk humbly with your God. Micah 6:8b
    For I desire mercy, and not sacrifice. Hosea 6:6a

    Hoarding: Anything Race

  9. #9
    Join Date
    Sep 2007
    Location
    WV
    Posts
    1,092
    Quote Originally Posted by ryanhall41 View Post
    pm'd and he means that you can have the barrel bored to accept freak inserts
    Didn't know you could do this to barrels, very cool. I'll have to research who does it and the cost. Thanks!

    Quote Originally Posted by Nuke View Post
    Wanna sell me that barrel kit for my Racegun?
    If I ever do sell it Nuke, you've got first shot at it.
    Blue Fade 2K3 Belsales Evolution X Build
    Started: June 7, 2012
    Finished: May 19, 2013

  10. #10
    Join Date
    Jun 2011
    Location
    DFW, TX
    Posts
    567
    Quote Originally Posted by MILKMAN View Post
    Didn't know you could do this to barrels, very cool. I'll have to research who does it and the cost. Thanks!
    http://www.mcarterbrown.com/forums/s...ng-update.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •