Page 9 of 9 FirstFirst ... 789
Results 81 to 85 of 85

Thread: Empire Resurrection Autococker Review

  1. #81
    Join Date
    Feb 2008
    Location
    Halifax, NS, Canada
    Posts
    180
    Hmm, interesting. I just reassembled mine after it got back from anodizing and it appears to be a bit more adjustable that what it was before... granted I have yet to chrono it but it seems to be cycling fine. I'll keep this in mind though, because it might be nice to swap out all the o-rings before I tune mine.
    Feedback:
    OLD CC, PbN, MCB

  2. #82
    Join Date
    Feb 2008
    Location
    Jackson, CA
    Posts
    2,690
    Quote Originally Posted by blue_baron View Post
    Regarding point 2 above: Is there any advantage to swapping out the stock internals with SCM internals? Or is changing the o-rings the only major fix?
    no not at all

  3. #83
    Join Date
    Jun 2013
    Posts
    45
    Hey Doc I'm wondering where you settled on bolt travel ends? As of right now if I pull the bolt back as far as it will go the bolt is just clearing the feedneck, pretty much flush with it actually. All the way forward and the bolts middle oring just becomes visible inside the feedneck.

    Just seeing if you've found a location that works best, whether or not I should adjust the bolt sled/pump arm.

  4. #84
    Join Date
    Feb 2008
    Location
    Jackson, CA
    Posts
    2,690
    Quote Originally Posted by Teahouser View Post
    Hey Doc I'm wondering where you settled on bolt travel ends? As of right now if I pull the bolt back as far as it will go the bolt is just clearing the feedneck, pretty much flush with it actually. All the way forward and the bolts middle oring just becomes visible inside the feedneck.

    Just seeing if you've found a location that works best, whether or not I should adjust the bolt sled/pump arm.
    I look at the bolt sled and where it stops in the foward position. While in it most fwd posstion I make sure there is a credit card space between the slead and the body. At that point I adj the pump arm length the make sure the ram is fully forward

  5. #85
    Join Date
    May 2012
    Posts
    717
    Hey Doc how thick is the Trigger frame?
    Instant pro player just add paint!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •