It has been a while since I started a sales thread and I am not sure if my prices are appropriate. With that in mind, feel free to make an offer. Please post then PM. All items are used so expect some scratches and dings. I will leave these things here for the week before posting on MCB as well. Thanks for looking.
1 - ’04 Prostock body kit - Gloss Black - Undrilled: Includes body, VASA, back block, and front block. $55
2 - ’05 Prostock body kit - Dust Black - Undrilled: Includes body, VASA, back block, and front block. $OLD
3 - Spanky Warped Monkey or FBM Teardrop - Includes body, back block, VASA, and clamping Ion feedback. I don’t have the front block which would take a Pre2K banjo bolt. The body is in great shape but the rear frame screw hole has been helicoiled. I chased the IVG threads out with a tap after installing the helicoil so the anodizing on the IVG threads is worn away. $OLD
4 - 2k WGP RF - Dust Black - No blocks or VASA. $OLD
5 - WGP Pump kit with Gat guide and hitman plate. The pump kit is in very good condition and includes a 2k back bock. The pump handle has the ability to run dual pump rods and the back block has room to drill and tap for the additional rod. $OLD
6 - CCM Pre2K pump kit - gloss black older style in good shape - $OLD
7 - CCM Pre2K pump kit with smoke handle - This kit in excellent condition and includes a new, fluted guide rod. $OLD
8 - TJD Pneumatic Assist Pump - This was working when I pulled it from the marker. It includes the Clippard ram. The previous owner spray painted the portion that mounts to the body. The rest of the parts are raw.$OLD
9 - WGP Single trigger hinge frame - Dust Black - This is in pretty rough cosmetic shape but works fine. $OLD
10 - WGP Double trigger hinge frame dust black in great shape. $OLD
11 - WGP Slider - Gloss Black in very good condition with internals. $OLD
12 - WGP Pneumatic set - I am not sure if these work or not. $OLD
13 - WGP Nickel BM Reg - I rebuilt it but haven’t tested it. There are a few tool marks but it is in pretty good cosmetic shape.$OLD
14 - WGP Dust black ’05 Prostock regulator - This is working and is in very good cosmetic shape. $OLD
15 - AA Vigilante Reg - Some scratches here and there but is pretty good cosmetic shape. It is untested. $55
16 - CP Dust black reg - Pretty good cosmetic shape but it is untested. $OLD
17 - WGP Gloss black BM reg - For parts only. It can be rebuilt but I can’t get it apart, and the lower half parts were quite gooey when I pulled it out. The seat is gone. $OLD
18 - VASAs - $12 each
19 - Miscellaneous parts lot. Everything in the photo for $OLD
20 - Dye Boomstick 14" Dust Black Tip AC Thread - Really good cosmetic condition with some light scuffing .689 $OLD
21 - CP Barrel gloss black 16" AC Thread - Scuffing throughout .689 $OLD
22 - TASO Stainless 12" barrel AC Thread - Really good shape .690 $29
23 - Shocktech valve with CCM hammer and IVG (Not sure about springs) $OLD
24 - CCM Lower tube - I installed this in a marker shot it a few times, but then decided to part the marker out. Like New $OLD
25 - AKA Valve Standard $OLD