Results 1 to 4 of 4

Thread: Resurrection Frame Question

  1. #1
    Join Date
    Dec 2018
    Posts
    6

    Resurrection Frame Question

    Got back into paintball recently and missed having my cocker so I got a resurrection not realizing the trigger frame is proprietary. Is there anyone out there that makes a two finger trigger for the Resi?

  2. #2
    Join Date
    May 2015
    Posts
    125
    No they donít unfortunately. You could put in a inception trigger plate that doesnít have the ramp to make it feel better.

  3. #3
    Join Date
    Dec 2018
    Posts
    6
    Ok, slightly different question. Does the Resurrection body have enough meat on the bottom of it to drill and thread it to accept a standard grip frame?

  4. #4
    Join Date
    Nov 2006
    Location
    New Jersey
    Posts
    2,873
    I've seen it done so I'm going to say yes it can. You could also have counter bores milled into the frame to accept the bosses of the Resi body...

    https://www.facebook.com/AngryAntles...type=3&theater

    https://www.facebook.com/AngryAntles...type=3&theater
    Last edited by njr_11; 01-25-2019 at 06:05 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •