Results 1 to 5 of 5

Thread: Centerflag Hyperframe questions

  1. #1
    Join Date
    Dec 2011
    Posts
    861

    Centerflag Hyperframe questions

    I recently acquired a Hyperframe and it turns on and the board functions work fine, but the clapper doesn't actuate when you pull the trigger. Does anyone have on of these frames that they can take a pick of the wiring harness so i can make sure everything is plugged in in the right place ?? The pics on google are fuzzy and i can't really tell. just for FYI its the 13bps version with semi, burst, auto and another mode, but i forgot what it was. And yes, the trigger is clicking the microswitch.

    Any help would be great. Thanks.

  2. #2
    Join Date
    May 2012
    Posts
    893
    Load some pics up from the top side of the board and the bottom side of the board. Maybe I can help you.
    Instant pro player just add paint!

  3. #3
    Join Date
    Dec 2011
    Posts
    861
    how are you all uploading pics these days ?? I used to use photobucket

  4. #4
    Join Date
    Feb 2012
    Location
    tampa
    Posts
    2,810
    imgur

  5. #5
    Join Date
    Oct 2017
    Location
    Detroit
    Posts
    4
    I know this thread is old but if itís not connected to the body, hold down the sear and pull the trigger. Then the clapper will work.


    Sent from my iPhone using Tapatalk
    Always looking for P&P parts and Cockers

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •